User Manual Q&AAnswer
Dec 29, 2024 - 11:13 PM
To wire the AA351B speakers, follow these steps:
1. Turn off and unplug your audio system before making any connections.
2. Use a good quality speaker cable with polarity coding (usually identified with a marking on the cable).
3. For speaker wire lengths up to 40ft, use 16 gauge speaker wire. For lengths greater than 40ft, use 14 gauge speaker wire.
4. Connect the positive lead of the speaker wire (indicated with "+") to the red (+) speaker terminal on each speaker.
5. Connect the negative lead of the speaker wire to the black (-) speaker terminal on each speaker.
6. Connect the other end of the speaker wire to the respective inputs on your amplifier or receiver.
Please refer to the diagram provided in the manual for a visual representation of the wiring setup.
Note: It is important to properly install the speakers to ensure they are secure and do not pose a risk of falling objects.
Add New Comment