User Manual Q&AAnswer
Dec 29, 2024 - 10:36 PM
To put on the earbud pads for the Sentry HO344 Balls In-Earbuds, follow these steps:
1. Hold the back of the earbud with your non-dominant hand to keep it stationary.
2. With your thumb and index finger, pinch the top of the earbud.
3. Below the earbud tip, you should feel a thin piece of hard plastic, which is the connector holding the earbud tip in place.
4. Gently pull the earbud tip away from the connector to remove it.
5. Take the replacement earbud pad and align the opening with the connector.
6. Press the earbud pad onto the connector until it is securely attached.
7. Repeat the process for the other earbud.
Note: It's important to ensure that the earbud pads are properly attached to the connectors to ensure a comfortable and secure fit while using the earbuds.
Add New Comment