User Manual Q&AAnswer
Dec 29, 2024 - 10:34 PM
To properly mount the Rockville RWB65B 6.5" 2 Way Marine Wakeboard Tower Speakers, follow these steps:
1. Release the rear clamp piece by using an alien wrench to remove the screws.
2. Place the front clamp piece snug against the crossbar.
3. Place the rear clamp piece on the other side of the crossbar.
4. Insert and tighten the screws, ensuring a tight and snug fit.
For a visual demonstration of the mounting process, you can watch the short video provided at vimeo.com/222473581 or by scanning the QR code provided in the user guide.
Please note that it is important to ensure that the positive (+) and negative (-) speaker wires are connected to the corresponding terminals on the amplifier. This will prevent any potential damage to the speakers. Additionally, it is recommended to set the gain on your amplifier properly to avoid distortion. Turn your receiver volume to 75% of the maximum and slowly turn up the gain. If you hear any slight distortion, turn it down one notch and leave it at that setting. Avoid playing the amplifier with the gain set to the maximum.
For further assistance or technical support, you can contact the Rockville technical help line at 1-646-758-0144, Monday through Thursday, 9am to 10pm EST, and Fridays, 9am to 3pm EST.
For more detailed information and additional FAQs, please refer to the user guide provided.
Add New Comment