User Manual Q&AAnswer
Dec 29, 2024 - 10:32 PM
To mount the Fusion SG-SL102SPW subwoofer, follow these steps:
1. Choose a suitable location for mounting the subwoofer, ensuring it meets the mounting considerations mentioned in the user guide.
2. Route the speaker wires and LED wires (if applicable) from the source to the speaker location.
3. Trim the provided template and ensure it fits in the selected location.
4. Secure the template to the chosen location, ensuring the Fusion logo on the template is at the bottom.
5. Use a jigsaw or rotary tool to cut the mounting surface along the inside of the line on the template.
6. Place the subwoofer in the cutout to test the fit. If necessary, use a file and sandpaper to refine the size of the cutout.
7. Once the subwoofer fits correctly, ensure the mounting holes on the subwoofer align with the pilot holes on the template. If not, mark new hole locations.
8. Drill the holes on the mounting surface using an appropriately sized drill bit for the surface and xxxx type.
9. Remove the template from the mounting surface.
10. Connect the subwoofer wires, ensuring proper polarity.
11. If applicable, connect the LED wires to the subwoofer.
12. Place the subwoofer in the cutout and secure it to the mounting surface using the provided screws. Avoid over-tightening the screws.
13. For the Classic model subwoofer, attach the grille to the front by aligning the FUSION logo and twisting the grille clockwise to secure it.
Please refer to the user guide for more detailed instructions and illustrations on mounting the subwoofer.
Add New Comment