User Manual Q&AAnswer
Dec 29, 2024 - 10:29 PM
To connect your laptop to the Epson POWERLITE 1915 Business Projector, follow these steps:
1. Make sure your laptop and the projector are both turned off.
2. Locate the VGA or HDMI port on your laptop. The type of port will depend on your laptop model.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your laptop and the projector.
7. On your laptop, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or a similar option.
8. In the display settings, select the option to extend or duplicate the display. This will allow you to use the projector as an additional display for your laptop.
9. Adjust the projector settings if needed. The manual provides detailed instructions on how to adjust the image size, focus, and other settings.
Please refer to the Epson POWERLITE 1915 Business Projector User Guide for more detailed instructions and troubleshooting tips.
Add New Comment