User Manual Q&AAnswer
Dec 29, 2024 - 10:12 PM
To pair the ANTSONIC Bluetooth Stereo Receiver with your smartphone, follow these steps:
1. Ensure that the receiver is fully charged. Connect the included black USB cable to the wall charger and plug it into a power source. The LED indicator on the receiver will turn red while charging and will go out when the battery is fully charged.
2. Turn on Bluetooth on your smartphone. Go to the Settings menu and select Bluetooth & other devices. Toggle the switch to turn on Bluetooth.
3. On the receiver, press and hold the power button until the LED indicator starts flashing blue. This indicates that the receiver is in pairing mode.
4. On your smartphone, search for available Bluetooth devices. The receiver should appear as "ANTSONIC" or a similar name. Select it to initiate the pairing process.
5. If prompted, enter the PIN code "0000" to complete the pairing process. The LED indicator on the receiver will turn solid blue once the pairing is successful.
6. Once paired, you can start playing music on your smartphone, and it will be wirelessly transmitted to the receiver.
Note: The specific steps may vary slightly depending on your smartphone's operating system. Please refer to your smartphone's user manual for detailed instructions on how to enable Bluetooth and pair devices.
For more information and troubleshooting tips, please refer to the ANTSONIC Bluetooth Stereo Receiver User Manual.
Add New Comment