User Manual Q&AAnswer
Dec 29, 2024 - 10:03 PM
To connect the SIMOLIO 2.4G Analog Wireless TV Headsets to your TV, please follow these steps:
1. Make sure your TV has RCA/3.5mm AUX Audio Outputs. These are typically located on the back or side of the TV.
2. Set up the transmitter:
a. Connect the power adapter to the transmitter and plug it into a power source.
b. Use the included Ø3.5mm to RCA Audio Cable or Ø3.5mm Audio Cable to connect the transmitter to the RCA/3.5mm AUX Audio Outputs on your TV.
3. Set up the headphones:
a. Charge the headphones fully before using them for the first time. Connect one end of the provided Micro USB charging cable to any USB power source and the other end to the Micro USB connector on the back of the left earpiece.
b. Turn on the headphones by pressing and holding the MFB (Multi-Function Button) for a few seconds until the LED indicator starts flashing blue and red alternately.
4. Pair the headphones with the transmitter:
a. Make sure the headphones are turned off.
b. On the transmitter, make sure the "SIMOLIO" option is turned off.
c. Press and hold the MFB on the headphones for about 4 seconds or until the LED indicator starts flashing blue and red alternately.
d. On your TV, go to the Bluetooth settings and search for available devices.
e. Select "SIMOLIO" from the list of available devices to pair and connect the headphones to the transmitter.
Once the pairing is successful, you should be able to hear the audio from your TV through the wireless headphones. Adjust the volume, tone, and balance settings on the headphones as desired for the best listening experience.
Note: If you encounter any difficulties during the setup process or if your TV has a different audio output configuration, it is recommended to provide the TV's jack panel details to SIMOLIO for personalized assistance in choosing the best unit for your TV.
Add New Comment