User Manual Q&AAnswer
Dec 29, 2024 - 10:00 PM
To connect your BUGANI Wearable Speaker to your phone via Bluetooth, please follow these steps:
1. Make sure your BUGANI Wearable Speaker is in pairing mode. When you turn on the speaker, you will hear some opening music and the blue LED will begin to blink, indicating that the speaker is ready for pairing.
2. On your phone, go to the Settings menu and turn on Bluetooth.
3. Wait for your phone to scan for available Bluetooth devices. It may take a few seconds for your BUGANI Wearable Speaker to appear on the list of available devices.
4. Once you see "BUGANI M83" (or a similar name) on your phone's Bluetooth device list, tap on it to connect.
5. The LED indicator on the speaker will flash blue and you may hear a beep, indicating that the pairing is successful.
6. After the successful pairing, you can start playing music or other audio on your phone, and the sound will be transmitted to your BUGANI Wearable Speaker.
Please note that the exact steps may vary slightly depending on your phone's operating system and version. Refer to your phone's user manual for specific instructions on how to connect Bluetooth devices.
If you encounter any issues during the pairing process, you can try resetting your BUGANI Wearable Speaker by pressing and holding the power and Bluetooth buttons simultaneously for a few seconds. This should reset the speaker and allow you to try the pairing process again.
For further assistance or troubleshooting, please refer to the user manual that came with your BUGANI Wearable Speaker.
Add New Comment