User Manual Q&AAnswer
Dec 29, 2024 - 09:52 PM
4To pair your Ginsey BeU Bluetooth Suction Wireless Shower Speaker with your smartphone, please follow these steps:
1. Make sure Bluetooth is activated on your smartphone. You can usually find this option in the settings menu of your phone.
2. Put your Ginsey BeU Bluetooth Suction Wireless Shower Speaker in pairing mode. To do this, turn on the speaker and hold down the ON/OFF button for about 3 seconds until the speaker enters pairing mode. The LED indicator on the speaker should start flashing.
3. On your smartphone, go to the Bluetooth settings and search for available devices. The Ginsey BeU Bluetooth Suction Wireless Shower Speaker should appear in the list of available devices. Select it to initiate the pairing process.
4. If prompted, enter the pairing code or PIN. The default code for most Bluetooth devices is "0000" or "1234". Consult the user manual of your specific speaker model if you encounter a different pairing code.
5. Once the pairing is successful, the LED indicator on the speaker should stop flashing and remain solid. Your smartphone should also indicate that it is connected to the speaker.
If you are still experiencing difficulties with the pairing process, try the following troubleshooting steps:
- Make sure the speaker and your smartphone are within close proximity to each other, as Bluetooth has a limited range.
- Turn off and on both the speaker and your smartphone, then attempt the pairing process again.
- Delete any previous Bluetooth connections on your smartphone and start the pairing process from scratch.
- Ensure that there are no other devices interfering with the Bluetooth connection, such as other Bluetooth devices or metal objects.
If you have followed these steps and are still unable to pair your devices, please refer to the user manual of your Ginsey BeU Bluetooth Suction Wireless Shower Speaker or contact the manufacturer's customer support for further assistance.
Add New Comment