How do I install the TYPE S TOURING ITEMS BT57132-1 Wireless Backup Camera Waterproof? (TYPE S TOURING ITEMS BT57132-1 Wireless Backup Camera Waterproof Instruction Guide)

Answer

manuals.plus

Dec 29, 2024 - 09:36 PM

To install the TYPE S TOURING ITEMS BT57132-1 Wireless Backup Camera Waterproof, please follow the steps below:

1. Start by locating a suitable mounting location for the camera on the back of your vehicle. The camera is designed to be mounted on the license plate frame, but you can also choose an alternative location that provides a clear view of the rear of your vehicle.

2. Once you have chosen the mounting location, use the included windshield mounts to secure the camera in place. Make sure the camera is securely attached and positioned correctly for optimal viewing.

3. Next, locate a suitable location for the monitor inside your vehicle. The monitor can be dashboard-mounted for easy visibility. Use the included windshield mounts to secure the monitor in place.

4. Connect the camera to the monitor using the quick connect connector. Ensure that the connection is secure and tight to prevent any signal loss.

5. Connect the monitor to a power source using the included 12V/24V power adapter. Plug the adapter into the lighter input in your vehicle or any other suitable power source.

6. Once the camera and monitor are connected and powered on, you should see the live video feed from the camera on the monitor. Adjust the position and angle of the camera if necessary to get the desired view.

7. Test the camera by engaging the reverse gear in your vehicle. The monitor should automatically switch to the camera feed, providing you with a clear view of the rear of your vehicle.

Please refer to the user manual for detailed installation instructions and troubleshooting tips. It is important to follow the instructions carefully to ensure proper installation and functionality of the TYPE S TOURING ITEMS BT57132-1 Wireless Backup Camera Waterproof.