User Manual Q&AAnswer
Dec 29, 2024 - 09:33 PM
To connect your speakers to the Kinter K2020A+ amplifier, follow these steps:
1. Identify the speaker output spring terminals on the amplifier. These terminals are located on the back of the amplifier and are labeled as "Speaker Out."
2. Strip the ends of your speaker wires to expose the bare wire.
3. Press the red spring terminal down and insert the positive (+) wire into the terminal. Release the terminal to secure the wire in place. Repeat this step for the black spring terminal and the negative (-) wire.
4. Make sure the speaker wires are securely connected to the amplifier.
5. Connect the other end of the speaker wires to your speakers. Ensure that the positive (+) wire is connected to the positive terminal of the speaker, and the negative (-) wire is connected to the negative terminal.
6. Repeat the above steps for the second speaker if you have a stereo setup.
7. Once the connections are made, power on the amplifier and adjust the volume and tone settings as desired.
For more detailed instructions and illustrations, please refer to the complete instruction guide provided with the product. You can find the instruction guide in the link provided at the end of this response.
Add New Comment