User Manual Q&AAnswer
Dec 29, 2024 - 09:07 PM
The Pyle Compact Mini Home Power Amplifier allows you to connect multiple speakers. Here are the different speaker connection options:
1. Single Speaker System: Connect the speaker (+) to the amplifier's 4-Ohm, 8-Ohm, or 16-Ohm terminal, depending on the speaker being used.
2. Two (or more) Speakers in Series: Connect the speaker (+) to the amplifier's 4-Ohm, 8-Ohm, or 16-Ohm terminal, depending on the total impedance of the two speakers. If each speaker has an impedance of 8-Ohm, the total speaker impedance in this series configuration is 16 ohms.
3. Two (or more) Speakers in Parallel: Connect the speaker (+) to the amplifier's 4-Ohm, 8-Ohm, or 16-Ohm terminal, depending on the total impedance of the two speakers. If each speaker has an impedance of 8-Ohm, the total speaker impedance in this parallel configuration is 4 ohms.
4. Four Speakers in Series and Parallel: You can combine series and parallel connections to connect four speakers. Make sure to calculate the total impedance and connect the speaker (+) circuit wire to the proper amp terminal.
5. Connecting Speakers with Transformers: If you are using 25V or 70V constant line voltages, you need to use a line matching transformer with each speaker. All transformers must be connected in parallel; never connect line transformers in series.
Please refer to the connection diagram in the user manual for a visual representation of these speaker connection options.
Note: It is important to calculate the total speaker impedance to avoid damage to the amplifier. The total speaker impedance should be greater than 16 Ohms or less than 4 Ohms.
Add New Comment