User Manual Q&AAnswer
Dec 29, 2024 - 09:06 PM
To connect your Marantz PM7000N to your speakers, follow these steps:
1. Make sure the amplifier and speakers are turned off and unplugged from the power source.
2. Identify the speaker outputs on the back of the PM7000N. There should be two sets of speaker terminals labeled "A" and "B".
3. For each speaker, strip the insulation from the end of the speaker wire and insert it into the corresponding speaker terminal. The positive (+) wire should be connected to the red terminal, and the negative (-) wire should be connected to the black terminal.
4. Tighten the speaker terminals to secure the wires in place.
5. Repeat the process for the other speaker, making sure to connect it to the corresponding speaker terminals.
6. Once both speakers are connected, double-check that all connections are secure.
7. Plug in the PM7000N and turn it on.
8. Turn on your speakers and adjust the volume to your desired level.
Please refer to the Marantz PM7000N instruction manual for more detailed instructions and illustrations on connecting your speakers.
Add New Comment