Answer
Dec 29, 2024 - 09:01 PM
To pair your SIMOLIO Wireless Bluetooth Headphones with your device, please follow these steps:
1. Make sure the headphones are turned on and in pairing mode. If they are not in pairing mode, turn them on and press and hold the "Vol+" and "Vol-" buttons simultaneously until the LED alternately flashes red and blue and emits two "beep" sounds. This indicates that the headphones are in pairing mode.
2. On your device, go to the settings menu and select "Bluetooth."
3. Turn on the Bluetooth capability on your device by moving the Active/Off switch to the orange position.
4. Your device will search for available Bluetooth devices. Look for the SIMOLIO headphones in the list of available devices. It may appear as "SIMOLIO JH-712P1M1" or a similar name.
5. Select the SIMOLIO headphones from the list to initiate the pairing process.
6. Once the pairing is successful, you will hear a confirmation sound from the headphones, and the LED will stop flashing. Your device will also display a notification that the headphones are connected.
Note: If you are still unable to pair the headphones with your device, try the following troubleshooting steps:
- Make sure the headphones are fully charged.
- Ensure that the headphones are within the Bluetooth range of your device (typically around 33 feet).
- Restart both the headphones and your device.
- "Forget" the connection on your device and try pairing again.
If you continue to experience difficulties, please refer to the user guide or contact SIMOLIO customer support for further assistance.
Add New Comment