User Manual Q&AAnswer
Dec 29, 2024 - 08:58 PM
To connect the ION Vinyl Transport Audio Suitcase Built-In Speakers to external speakers, follow these steps:
1. Make sure the Vinyl Transport is powered on and the needle is on the record.
2. Locate the RCA Output on the Vinyl Transport. This is a line-level coaxial audio output.
3. Take an RCA cable and connect one end to the RCA Output of the Vinyl Transport.
4. Connect the other end of the RCA cable to the input of your stereo system or powered speakers. Make sure to connect it to a line-level input and not a phono-level input, as the Vinyl Transport's RCA outputs are line-level and could damage a device with phono-level inputs.
5. Once the connections are made, adjust the volume on the Vinyl Transport using the Volume/Power xxxx . You can also adjust the volume on your stereo system or powered speakers if needed.
6. You should now be able to hear the audio from the Vinyl Transport through your external speakers.
Please refer to the "Connection Diagram" section in the user manual for a visual representation of the connections.
Note: If you encounter any difficulties or have further questions, it is recommended to consult the troubleshooting section in the user manual or contact ION Audio or your retailer for technical support. The contact information can be found in the Safety & Warranty Manual included with the product.
Add New Comment