User Manual Q&AAnswer
Dec 29, 2024 - 08:52 PM
Installation of the Monoprice 114890 Commercial Audio in-ceiling speaker involves the following steps:
1. Determine the location: Choose a suitable location on the ceiling where you want to install the speaker. Ensure that there is enough space and clearance for the speaker to fit properly.
2. Cut the hole: Use a hole saw or a template provided with the speaker to cut a hole in the ceiling of the appropriate size for the speaker.
3. Connect the speaker wires: Run speaker wires from your audio source or amplifier to the installation location. Strip the insulation from the ends of the wires and connect them to the corresponding terminals on the back of the speaker. Make sure to match the positive (+) and negative (-) terminals correctly.
4. Mount the speaker: Place the speaker into the hole in the ceiling and secure it using the mounting tabs or screws provided. Ensure that the speaker is flush with the ceiling surface.
5. Adjust the speaker settings: If necessary, adjust the speaker settings on your audio source or amplifier to optimize the sound output. Refer to the user manual of your audio equipment for specific instructions on adjusting settings.
6. Test the speaker: Once the installation is complete, test the speaker by playing audio through it. Make sure the sound is clear and balanced.
Please note that the above instructions are a general guide. For detailed installation instructions specific to the Monoprice 114890 Commercial Audio in-ceiling speaker, refer to the instructions manual provided with the product.
Add New Comment