User Manual Q&AAnswer
Dec 29, 2024 - 08:35 PM
To connect your VSSL A.6X to your network, follow these steps:
1. Analyze your existing network topology: Before installing your VSSL A.6X, it's important to understand your network setup and make any necessary adjustments. Login to your network equipment and make adjustments according to the network settings suggestions provided in the manual.
2. Connect the A.6X to your network: The A.6X requires a connection to your high-speed network via an Ethernet cable. Use the provided Ethernet cable to connect the A.6X's network input port to your router or network switch.
3. Reboot your networking equipment: After connecting the A.6X to your network, reboot your networking equipment, including your router and any switches or access points.
4. Download the VSSL app: On your mobile device, go to the app store and download the VSSL app. This app will be used to set up and control your A.6X.
5. Set up your A.6X in the VSSL app: Open the VSSL app and follow the prompts to set up your A.6X. The app will guide you through the process of connecting to your network and configuring your zones.
6. Choose your streaming method: Once your A.6X is set up, you can choose your preferred streaming method, such as AirPlay 2, Chromecast, Spotify Connect, or Alexa Cast. Follow the instructions in the manual to set up and use these streaming methods.
By following these steps, you should be able to successfully connect your VSSL A.6X to your network and start enjoying your favorite music. For more detailed instructions and troubleshooting tips, refer to the user manual provided with your A.6X.
Add New Comment