User Manual Q&AAnswer
Dec 29, 2024 - 10:41 AM
To connect your InFocus IN24 DLP Projector to your computer, follow these steps:
1. Ensure that both your projector and computer are turned off.
2. Locate the VGA or HDMI port on your computer. If your computer has a VGA port, you will need a VGA cable. If it has an HDMI port, you will need an HDMI cable.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of your projector.
5. Connect the other end of the VGA or HDMI cable to the input port on your projector.
6. Turn on your computer and then turn on your projector.
7. On your computer, go to the display settings and select the appropriate display mode for your projector. This may vary depending on your operating system, but typically you can access display settings by right-clicking on the desktop and selecting "Display Settings" or "Screen Resolution."
8. Adjust the focus and zoom on your projector as needed to ensure a clear image.
For more detailed instructions and troubleshooting tips, please refer to the InFocus IN24 DLP Projector Instruction Manual provided above.
Add New Comment