User Manual Q&AAnswer
Dec 29, 2024 - 10:37 AM
To install the Rockford Fosgate M0-65 Full Range Speakers, please follow these steps:
1. Before beginning the installation, make sure to read and understand the instructions provided in the manual.
2. Disconnect the negative (-) terminal of your vehicle's battery to prevent any damage or injury during the installation process.
3. Determine the mounting location for the speakers. Ensure that there is enough space for the speakers to mount evenly and that the location is deep enough to accommodate the speakers without any obstructions.
4. Refer to the specification chart in the manual to determine the proper diameter hole to cut for your specific speaker model. Cutting and mounting templates can be found on the Rockford Fosgate website.
5. Mark the locations for the mounting screws and drill the holes using the supplied drill bit.
6. Feed the speaker wires through the cutout and connect them to the speaker terminals. Make sure to observe proper polarity when connecting the wires. The positive terminal is indicated with a "+" symbol.
7. Tighten the screws until the speakers are snugly in place to prevent any rattling. Avoid over-tightening the screws.
For more detailed instructions and diagrams, please refer to the installation section of the Rockford Fosgate M0-65 Full Range Speakers Instruction Guide.
Add New Comment