User Manual Q&AAnswer
Dec 29, 2024 - 08:45 AM
To connect the NHT C-3 speakers to your receiver or amplifier, follow these steps:
1. Before connecting the speakers, turn off the AC power to avoid potential damage to your components.
2. The terminals on the back of the speakers accept raw wire, banana plugs, or spade lugs. Prepare the speaker wires by stripping 1/4" - 3/8" of insulation from the ends and tightly twist the exposed strands.
3. Connect the speaker wires to the speakers and the amplifier, making sure to match the positive (+) and negative (-) terminals correctly. The same half of the wire pair connected to the positive terminal on the amplifier should be connected to the positive terminal on the speaker, and the same for the negative terminal.
4. Hand-tighten the speaker wire terminals on the speakers and the amplifier. Do not use excessive force, as it can break the terminals.
5. Before powering up the receiver or amplifier, make sure there are no stray strands from one terminal touching the other terminals.
Please refer to the user manual for additional information and diagrams on connecting the speakers to your specific amplifier or receiver model.
Add New Comment