User Manual Q&AAnswer
Dec 29, 2024 - 08:08 AM
To connect your DCT Security Camera Outdoor to your Wi-Fi network, please follow these steps:
1. Register a Vicoo account: Download and install the Vicoo app on your mobile device. Open the app and register for a new account.
2. Network Configuration: Make sure your mobile device is connected to your Wi-Fi network. Open the Vicoo app and go to the "Device" tab. Tap on the "+" icon to add a new device.
3. Add Camera to Phone: Follow the on-screen instructions to add the camera to your phone. This may involve scanning a QR code or entering the camera's serial number.
4. Connect to Wi-Fi: When prompted, select your Wi-Fi network from the list and enter your Wi-Fi password. Make sure you are connecting to a 2.4GHz Wi-Fi network, as the camera does not support 5GHz.
5. Complete Setup: Follow the remaining on-screen instructions to complete the setup process. This may involve updating the camera's firmware or configuring additional settings.
Once the setup is complete, your DCT Security Camera Outdoor should be successfully connected to your Wi-Fi network. You can now use the Vicoo app to monitor and control the camera remotely.
For more detailed instructions and troubleshooting tips, please refer to the operational guide provided with your DCT Security Camera Outdoor.
Add New Comment