User Manual Q&AAnswer
Dec 29, 2024 - 08:04 AM
To install the KENWOOD KFCS6976EX 6X9 500W 3 Way CAR Speakers in your car, please follow these steps:
1. Before installation, carefully read and understand the instructions provided in the user guide.
2. For safety, disconnect the negative terminal from the battery before starting the installation.
3. If additional wiring is required, it is recommended to run all wires before mounting the speakers in place for easier assembly.
4. Use high-quality connectors to ensure a reliable installation and minimize signal or power loss.
5. Be cautious when drilling or cutting and avoid damaging gas tanks, fuel lines, brake or hydraulic lines, vacuum lines, or electrical wiring.
6. Avoid running speaker wires underneath your vehicle. Running them inside the vehicle provides better protection from exhaust heat and environmental elements.
7. Avoid running wires over, near, or through sharp-edged surfaces. Use rubber grommets to protect any wires routed through metal.
8. When running the speaker cable from the amplifier, avoid running it near sources of high current, such as wiring harnesses or battery cables.
For more detailed instructions and illustrations, please refer to the user guide provided with the product.
Note: It is always recommended to consult a professional or experienced installer if you are unsure about the installation process.
Add New Comment