User Manual Q&AAnswer
Dec 29, 2024 - 07:58 AM
To connect the Autotek MM-1525.2D LCD Projector to your audio system, you will need to use the high-level inputs or RCA outputs, depending on your audio system. If your audio system does not offer RCA output, you can still connect the projector using the high-level inputs.
1. If your audio system has RCA outputs:
- Connect the RCA cables from the audio system's RCA outputs to the RCA inputs on the projector.
- Make sure to match the left and right channels correctly.
- This will allow the audio signal from your audio system to be played through the projector's speakers.
2. If your audio system does not have RCA outputs:
- Use the high-level inputs on the projector.
- Connect the speaker wires from your audio system's speaker outputs to the high-level input terminals on the projector.
- Make sure to match the positive and negative terminals correctly.
- This will allow the audio signal from your audio system to be amplified and played through the projector's speakers.
Please refer to the user manual for more detailed instructions and diagrams on how to connect the Autotek MM-1525.2D LCD Projector to your audio system.
Add New Comment