User Manual Q&AAnswer
Dec 29, 2024 - 07:36 AM
To install the Dual Electronics DS693 car speakers, please follow these guidelines:
1. Determine where you want to mount the speakers and ensure that the area is large enough and deep enough for the speaker to fit evenly.
2. Refer to the specification chart in the manual to determine the proper diameter hole to cut for your speaker model.
3. If needed, use the grille as a template to mark the locations for the mounting screws. Drill the holes with a 3/32" bit.
4. Before connecting the wires, make sure to observe proper polarity. The positive terminal of the speaker is indicated with a "+" symbol.
5. Fit the speaker into the hole cut-out and mount it using the supplied screws. If you are using the speaker grill, insert four screws into the grill holes and then mount the speaker.
For a more detailed installation process and safety precautions, please refer to the "Getting Started" section of the Dual Electronics DS693 Car Speakers Operational Guide.
Add New Comment