User Manual Q&AAnswer
Dec 29, 2024 - 07:34 AM
To properly install the , please follow the guidelines provided in the instruction manual:
1. Before installation, carefully read and understand the instructions in the manual.
2. For safety, disconnect the negative terminal from the battery before starting the installation.
3. If additional wiring is required, it is recommended to run all wires before mounting the speaker.
4. Use high-quality connectors for a reliable installation and to minimize signal or power loss.
5. Be cautious when drilling or cutting and avoid damaging gas tanks, fuel lines, brake or hydraulic lines, vacuum lines, or electrical wiring.
6. Avoid running speaker wires underneath the vehicle and instead run them inside the vehicle for better protection from heat and environmental elements.
7. Avoid running wires over, near, or through sharp-edged surfaces and use rubber grommets to protect any wires routed through metal.
8. When running the speaker cable from the amplifier, avoid running it near sources of high current, such as wiring harnesses or battery cables.
For mounting the speakers:
1. Determine the mounting location and ensure it is large enough for the speaker to mount evenly.
2. Refer to the specification chart in the manual to determine the proper diameter hole to cut for your speaker model.
3. Use the grille as a template to mark the locations for the mounting screws and drill the holes with a 3/32" bit.
4. Observe proper polarity when connecting the wires, with the speaker's positive terminal indicated by a "+" symbol.
5. Fit the speaker to the hole cut-out and mount it using the supplied screws. If using the speaker grill, insert 4 screws into the grill holes and then mount the speaker.
Please refer to the complete instruction manual for more detailed information and illustrations on the installation process.
Add New Comment