User Manual Q&AAnswer
Dec 29, 2024 - 07:27 AM
To connect the Polk SR2 wireless surround speakers to your sound bar, follow these steps:
1. Place the surround speakers on the left and right sides, equidistant and slightly behind the main listening position. Make sure to place the speaker marked "LEFT" on the left and the speaker marked "RIGHT" on the right. Aim the surround speakers toward the main listening position.
2. Plug a power supply into each speaker and then into a power outlet.
3. Enter pairing mode on the sound bar by pressing and holding the CONNECT button on the back of the sound bar for about 4 seconds.
4. Press and hold the CONNECT button on the back of the surround speaker for about 4 seconds. Release the button when the light on the back of the surround speaker is solid green.
5. Repeat step 4 for the other surround speaker.
6. Press and release the CONNECT button on the back of the sound bar to complete pairing.
If you are experiencing any issues with the connection or not hearing sound from the surround speakers, please refer to the troubleshooting section in the manual or visit the Polk Audio support website for further assistance.
Add New Comment