User Manual Q&AAnswer
Dec 29, 2024 - 05:41 AM
To connect the ANTSONIC Bluetooth 5.0 Home Stereo Receiver to your existing stereo equipment, you can follow these steps:
1. Make sure your stereo receiver is turned off.
2. Locate the audio output ports on the back of your stereo receiver. The ANTSONIC Bluetooth receiver supports both digital (optical) and analog (RCA / 3.5mm AUX audio) outputs.
3. Choose the appropriate cable based on the output ports of your stereo receiver. For RCA output, you can use an RCA cable. For 3.5mm AUX audio output, you can use a 3.5mm to 3.5mm audio cable.
4. Connect one end of the cable to the corresponding output port on your stereo receiver.
5. Connect the other end of the cable to the corresponding input port on the ANTSONIC Bluetooth receiver.
6. Turn on your stereo receiver and set it to the appropriate input source for the connected cable.
7. Make sure the ANTSONIC Bluetooth receiver is powered on and in pairing mode. Refer to the manual for instructions on how to pair the Bluetooth receiver.
8. On your Bluetooth-enabled device (e.g., smartphone, computer), enable Bluetooth and search for available devices.
9. Select the ANTSONIC Bluetooth receiver from the list of available devices to establish a Bluetooth connection.
10. Once the connection is established, you should be able to stream audio from your Bluetooth-enabled device to your stereo receiver.
Please refer to the complete instructions manual for more detailed information and troubleshooting steps.
Add New Comment