User Manual Q&AAnswer
Dec 29, 2024 - 05:39 AM
To connect your speakers to the Technical Pro RX55URIBT receiver, follow these steps:
1. Make sure the RX55URIBT and the speakers are powered off and the volume levels are turned down.
2. Locate the "Main Speakers" outputs on the rear panel of the RX55URIBT.
3. Connect the positive (+) terminal of each speaker to the corresponding positive (+) terminal on the "Main Speakers" outputs.
4. Connect the negative (-) terminal of each speaker to the corresponding negative (-) terminal on the "Main Speakers" outputs.
5. Ensure that the speaker wires are securely connected and there are no loose connections.
6. Once the speakers are connected, you can power on the RX55URIBT and adjust the volume levels to your desired level.
Note: The RX55URIBT is designed to power up to two full-range passive loudspeakers. Make sure to use 8-ohm speakers for optimal performance.
Add New Comment