User Manual Q&AAnswer
Dec 29, 2024 - 05:34 AM
To connect your Bestisan SW80 subwoofer to your Bestisan SR04 bookshelf speakers, you will need an audio video receiver or a stereo receiver to power the bookshelf speakers. Follow these steps:
1. Connect the bookshelf speakers to the receiver using speaker wire. Make sure to match the positive (+) and negative (-) terminals on the speakers and the receiver.
2. Locate the subwoofer output on your receiver. It is usually labeled as "Sub Out" or "Subwoofer Out."
3. Use an RCA-type cable (usually a single cable) to connect the subwoofer output on the receiver to the line input on the subwoofer. The line input on the subwoofer is labeled as "Line In" or "LFE In."
4. Ensure that the cable is securely connected to both the receiver and the subwoofer.
5. Power on the subwoofer and adjust the volume to your preferred level. If your subwoofer has a phase control, you can adjust it to compensate for any delay between the subwoofer and the main speakers. The phase control should be set to 0 or normal as a starting point.
By following these steps, you should be able to connect your Bestisan SW80 subwoofer to your Bestisan SR04 bookshelf speakers and enjoy enhanced bass performance in your audio setup. For further assistance, you can refer to the user manual provided with the subwoofer.
Add New Comment