User Manual Q&AAnswer
Dec 29, 2024 - 05:25 AM
To set up the KING VQ4500 Tailgater portable satellite, follow these steps:
1. Find a location with an unobstructed view of the southern sky for the best signal reception.
2. Connect one end of the supplied RG-6 coax cable to the MAIN port on the KING Tailgater and place it in position.
3. Connect the other end of the coax cable to the SATELLITE IN port on your receiver.
4. Plug your receiver into a 110 volt AC power source and wait for the green power light to turn solid.
5. Plug in and turn on your TV, and choose the input that matches the connection from your receiver.
6. Point your receiver's remote at the front of the receiver and press SAT.
7. Press RECORD, and when a number appears in the box, verify CONTINUE is highlighted and press SELECT.
8. Use the arrow buttons on your remote to highlight the letter group that includes the first letter of the state you are currently in, and press SELECT.
9. Highlight the state you are currently in from the state menu and press SELECT.
10. Verify Scan is highlighted and press SELECT to begin the scan. This may take several minutes to complete.
11. The receiver will download software for the KING Tailgater, which may take 20-25 minutes.
12. The receiver will reset, and the Mobile Antenna Setup Screen will appear.
13. Repeat steps 2-4 to start a second scan.
14. When the scan is complete, the Acquiring Signal message will display. Acquiring the signal may take up to 5 minutes to complete.
15. After your receiver has acquired the signal, it is ready to be activated. Call 1-800-963-DISH (3474) to activate your service.
16. The electronic program guide will download, which may take up to 10 minutes to complete.
For more detailed instructions and troubleshooting tips, refer to the KING VQ4500 Tailgater Portable Roof Mountable Satellites USER MANUAL.
Add New Comment