User Manual Q&AAnswer
Dec 29, 2024 - 05:14 AM
To connect the ViewSonic PG707X projector to a network, you can follow these steps:
1. Ensure that your projector is connected to a power source and turned on.
2. Connect an Ethernet cable from your network router or switch to the LAN port on the projector.
3. On the projector's remote control, press the Menu button to access the main menu.
4. Use the arrow keys on the remote control to navigate to the Network menu and press the Enter button.
5. In the Network menu, select the Network Configuration option and press Enter.
6. In the Network Configuration menu, select the DHCP option if your network uses DHCP to assign IP addresses automatically. If your network uses static IP addresses, select the Static option and enter the appropriate IP address, subnet mask, gateway, and DNS server information.
7. Once you have configured the network settings, select the Apply button to save the changes.
8. Press the Exit button on the remote control to exit the menu.
After following these steps, your ViewSonic PG707X projector should be connected to the network. You can now access network features such as remote control, monitoring, and firmware updates. For more detailed instructions and troubleshooting tips, please refer to the user guide provided in the link above.
Add New Comment