User Manual Q&AAnswer
Dec 29, 2024 - 05:09 AM
To connect the Micca PB42X speakers to your audio source, follow these steps:
1. Speaker Wire Connection: The built-in amplifier is contained in the right PB42X speaker. Use the included speaker wire to connect the "Output to Left" terminals from the back of the right speaker to the input terminals on the left speaker. Ensure that the correct polarity is observed by connecting black to black and red to red.
2. Connecting Power: The PB42X is supplied with an 18V/2A AC to DC power adapter. Before connecting the power adapter, make sure the power switch on the PB42X is in the OFF position. Then, connect the power adapter to the PB42X.
3. Input Connections: The PB42X has two input connections: a 3.5mm stereo mini jack and RCA stereo input jacks. Only one input source can be connected at a time. Choose the appropriate input connection based on your audio source. Connect either the 3.5mm stereo mini jack or the RCA stereo input jacks to your audio source.
Once you have made the necessary connections, turn on the PB42X and adjust the volume xxxx to the desired level. Make sure to double-check all connections and refer to the manual for any additional information or troubleshooting tips.
Please note that using any other amplifier to power the PB42X will result in severe damage to the amplifier and the speakers.
Add New Comment