User Manual Q&AAnswer
Dec 29, 2024 - 04:32 AM
To mount the Dual Electronics DS652 2-Way Car Speakers, please follow these steps:
1. Determine where you want to mount the speakers. Make sure the area is large enough and deep enough for the speaker to fit evenly.
2. Refer to the specification chart in the manual to determine the proper diameter hole to cut for your speaker model.
3. If needed, use the grille as a template to mark the locations for the mounting screws. Drill the holes with a 3/32" bit.
4. Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with a "+" symbol.
5. Fit the speaker into the hole cut-out. Mount the speaker using the supplied screws. If you are using the speaker grill, insert 4 screws into the grill holes and then mount the speaker.
Please refer to the manual for more detailed instructions and illustrations on mounting the Dual Electronics DS652 2-Way Car Speakers.
Add New Comment