User Manual Q&AAnswer
Dec 29, 2024 - 03:39 AM
To set the alarm on the GPX C353B clock radio, follow these steps:
1. Make sure the clock radio is turned off. If it's currently in radio mode, press and hold the Power/Source/Al Off button to turn it off.
2. Press the Al1 or Al2 button until the display begins to blink. This indicates that you are in alarm setting mode.
3. Use the Hour button to adjust the hour for the alarm. The PM indicator will light up if the hour is set in the PM.
4. Use the Min button to adjust the minute for the alarm.
5. Press the Al1 or Al2 buttons repeatedly to switch between the alarm options. You can choose between Radio and Buzzer for the alarm sound. Please refer to the Radio section of the manual to adjust the volume of the alarm.
6. Once you have set the desired alarm time and sound, the alarm will sound at the set time.
To set the other alarm, simply follow the same steps and choose the alarm that is not currently set.
If you want to cancel the alarm, follow the instructions for setting the alarm and press the Al1 or Al2 buttons repeatedly until the indicator is no longer lit.
To snooze or reset the alarm, you can press the Snooze/Sleep button to delay the alarm for an additional 9 minutes. Alternatively, you can press the Power/Source/Al Off button to turn off the alarm until the set alarm time is reached again.
For more detailed instructions and information, please refer to the owner's guide that came with your GPX C353B clock radio.
Add New Comment