User Manual Q&AAnswer
Dec 29, 2024 - 03:23 AM
To connect your Epson PowerLite S1 Multimedia Video Projector to your computer, follow these steps:
1. Make sure your computer is turned off.
2. Locate the computer video cable that came with your projector. It should have a blue connector on one end and a connector that matches the video port on your computer on the other end.
3. Connect the blue connector of the computer video cable to the Computer/Component Video port on the back of the projector.
4. Connect the other end of the computer video cable to the video port on your computer. The video port may be labeled as "VGA," "RGB," or "D-Sub."
5. Once the cable is securely connected, turn on your computer.
6. Press the Power button on the projector to turn it on.
7. Use the Source Search button on the projector or the remote control to select the computer as the input source. The projector will search for the computer signal and display it on the screen.
Note: If your computer has multiple video ports, make sure you connect the computer video cable to the correct port that corresponds to the display you want to use with the projector.
For more detailed instructions and troubleshooting tips, refer to the Epson PowerLite S1 Multimedia Video Projector User's Guide, specifically the section on "Connecting to a Computer" (page 29) in the provided manual.
Add New Comment