User Manual Q&AAnswer
Dec 29, 2024 - 03:21 AM
To connect your Epson S17 PowerLite LCD Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and wait for it to fully boot up.
6. Turn on the projector by pressing the Power button on the control panel or remote control.
7. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can find the display settings in the Control Panel or System Preferences.
8. Adjust the projector settings if necessary. You can refer to the Epson S17 PowerLite LCD Projector User's Guide for detailed instructions on adjusting settings such as brightness, contrast, and keystone correction.
Once the connection is established and the settings are adjusted, your computer's display should be projected onto the screen or surface connected to the projector.
Add New Comment