User Manual Q&AAnswer
Dec 29, 2024 - 03:12 AM
To connect the Genelec F One B Active Subwoofer to your audio system, please follow these steps:
1. Check the contents of the shipment to ensure you have all the necessary components, including the subwoofer, wireless remote control, mains cable, IR extension cable, and Quick Setup guide.
2. Place the subwoofer in its desired position in your room.
3. Connect audio cables from your signal source(s) to the subwoofer. You can connect up to two digital audio sources and two analog audio sources. The subwoofer has both analog and digital input connectors.
4. Connect the main loudspeakers to the output connectors of the subwoofer.
5. Adjust the phase of the subwoofer as instructed in the manual and the Quick Setup guide. This will help ensure proper synchronization between the subwoofer and the main loudspeakers.
6. Use test recordings and familiar music pieces to judge the sound balance. You can use the "SUBWOOFER LEVEL" rotary control and the "BASS ROLL-OFF" dip switches to fine-tune the balance. If needed, you can also consider relocating the subwoofer for optimal sound.
By following these steps, you should be able to successfully connect and set up the Genelec F One B Active Subwoofer with your audio system. For more detailed instructions and information, please refer to the operating manual provided with the product.
Add New Comment