User Manual Q&AAnswer
Dec 29, 2024 - 03:07 AM
To connect your smartphone to the Pyle Retro Speaker Vintage Radio via Bluetooth, follow these steps:
1. Turn on the Pyle Retro Speaker Vintage Radio by rotating the VOLUME/ON/OFF xxxx located on the front panel to the on position.
2. Rotate the FUNCTIONS xxxx to select BLUETOOTH mode.
3. Turn on the Bluetooth function on your smartphone and scan for available devices. The Pyle Retro Speaker Vintage Radio will be displayed as "Pyle Radio" when discovered by your Bluetooth device.
4. Select the Pyle Retro Speaker Vintage Radio on your smartphone. If prompted, enter the password "0000" during pairing.
5. Once the pairing is successful, you will hear a short tone from the speakers of the Pyle Retro Speaker Vintage Radio.
6. Play music or audio on your smartphone, and the sound will be played through the Pyle Retro Speaker Vintage Radio.
Note:
- Make sure your smartphone and the Pyle Retro Speaker Vintage Radio are within 10 meters of each other.
- Check if there are other Bluetooth devices nearby that may interfere with the signal and connection.
- The Pyle Retro Speaker Vintage Radio can be paired with multiple different Bluetooth devices, but it can only be connected and played by one device at a time.
- Ensure that no other device is actively connected to the Pyle Retro Speaker Vintage Radio before attempting to connect your smartphone.
Add New Comment