User Manual Q&AAnswer
Dec 29, 2024 - 03:03 AM
To connect the Genelec 8010APM Bi-Amplified Active Monitor to your audio setup, you will need the appropriate cables depending on your input source. Here are the steps to connect the monitor:
1. Determine the output source of your audio setup (e.g., computer, audio interface, preamp, TV).
2. Choose the appropriate cables based on your output source. If you are connecting to a computer or a device with a 3.5mm jack, you can use a "3.5mm TRS to Dual XLR3M Stereo Breakout Cable" or a "3.5mm TRS to Dual 1/8 inch TS Stereo Breakout Cable." These cables can be found on Amazon or other audio equipment retailers.
3. Connect one end of the cable to the output source (e.g., headphone jack, line output) and the other end to the input of the Genelec 8010APM monitor. The input on the monitor is an XLR connector.
4. Repeat the above steps for the second monitor if you are using a stereo setup.
Note: If you are using a subwoofer with your setup, you can connect the subwoofer to your audio interface or output source, and then connect the studio monitors to the subwoofer. This setup allows the subwoofer to handle the low frequencies, providing a more balanced sound.
For more detailed information and illustrations, please refer to the Genelec 8010APM Bi-Amplified Active Monitor User Guide, which can be accessed using the following link: [Genelec 8010APM User Guide](https://manuals.plus/wp-content/uploa...)
If you have any further questions or need additional support, feel free to reach out to us at [Pixel Pro Audio](https://www.amazon.com/stores/page/7A...). We are here to assist you.
Add New Comment