User Manual Q&AAnswer
Dec 29, 2024 - 02:57 AM
To connect your device to the ScreenBeam SBWD100A01 Wireless Display Receiver, follow these steps:
1. Ensure that your device (e.g., laptop, smartphone, or tablet) supports wireless display or Miracast technology.
2. Power on the ScreenBeam receiver by connecting it to a power source using the provided power adapter.
3. Connect the ScreenBeam receiver to your display device (e.g., TV or projector) using an HDMI cable.
4. On your device, open the wireless display settings. The exact steps may vary depending on your device's operating system.
5. Look for the ScreenBeam receiver in the list of available devices and select it.
6. If prompted, enter the PIN displayed on your TV or projector screen to establish a connection.
7. Once connected, your device's screen should be mirrored on the TV or projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the ScreenBeam SBWD100A01 Wireless Display Receiver. You can find the manual at the following link: [ScreenBeam SBWD100A01 Wireless Display Receiver User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment