User Manual Q&AAnswer
Dec 29, 2024 - 02:55 AM
To connect your Marantz AV7702 Audio Video Processor to your TV and other audio/video devices, follow these steps:
1. Connect your TV to the AV7702 using an HDMI cable. Locate the HDMI output port on the AV7702 and connect one end of the HDMI cable to it. Then, connect the other end of the HDMI cable to the HDMI input port on your TV.
2. Connect your audio/video sources to the AV7702. Depending on the type of device you are connecting, you can use HDMI, digital audio, or analog audio connections. Refer to the manual for specific instructions on connecting each type of device.
3. Configure the input settings on the AV7702. Use the remote control or the front panel buttons to select the input source you want to use. The AV7702 will automatically detect the connected devices and assign them to the appropriate input.
4. Set up the audio output settings. The AV7702 supports various audio output options, including multi-channel surround sound and stereo. Use the setup menu to select the desired audio output configuration and adjust the settings according to your preferences.
5. Test the connections and settings. Turn on your TV and audio/video devices, and make sure the audio and video signals are properly transmitted to the TV. Adjust the volume and other settings as needed.
For more detailed instructions and troubleshooting tips, refer to the Marantz AV7702 Audio Video Processor user guide.
Add New Comment