User Manual Q&AAnswer
Dec 29, 2024 - 02:19 AM
To connect your Epson PowerLite 93 Multimedia Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the Computer/Component Video port on the back of the projector.
4. Connect the other end of the VGA cable to the VGA port on your computer.
5. Turn on your computer.
6. Turn on the projector by pressing the Power button.
7. Use the Source Search button on the projector or the remote control to select the Computer/Component Video input source.
Once the connection is established, your computer screen should be projected onto the projector screen. You may need to adjust the display settings on your computer to optimize the resolution and aspect ratio for the projector.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 93 Multimedia Projector Operation's Guide provided in the link above.
Add New Comment