User Manual Q&AAnswer
Dec 29, 2024 - 02:08 AM
To set up the GEFEN EXT-WHD-1080P-SR Wireless Extender, please follow the steps below:
1. Connect the Transmitter (TX) unit to the source device (e.g., Blu-ray player, gaming console) using an HDMI cable.
2. Connect the Receiver (RX) unit to the display device (e.g., TV, projector) using an HDMI cable.
3. Connect the power supply to both the Transmitter and Receiver units, and plug them into a power outlet.
4. Ensure that the Transmitter and Receiver units are within the wireless range of each other (up to 30 meters or 100 feet).
5. Power on the source device and the display device.
6. Wait for the Transmitter and Receiver units to establish a wireless connection. The LED indicators on both units will show the status of the connection.
7. Once the wireless connection is established, you should see the source device's content on the display device.
For more detailed instructions and troubleshooting information, please refer to the GEFEN EXT-WHD-1080P-SR Wireless Extender Instruction Guide provided in the link above.
Add New Comment