How do I install and set up the Audio-Technica ATR7200-T2 VHF Wireless Handheld Microphone? (audio-technica ATR7200-T2 VHF Wireless Handheld Microphone User Manual)

Answer

manuals.plus

Dec 29, 2024 - 01:58 AM

To install and set up the , follow these steps:

1. Receiver Installation:
- Place the receiver at least 3 feet above the ground and 3 feet away from walls or metal surfaces to minimize reflections.
- Keep the receiver antenna away from noise sources such as digital equipment, motors, automobiles, and neon lights.
- Position the receiver antenna in a vertical position for the best operating performance.
- Connect the receiver's audio output jack to the mixer/amplifier's aux-level input using a shielded audio cable with a ¼" phone plug.
- Connect the DC plug of the included AC power adapter to the DC power input on the back of the receiver, and plug the adapter into a standard AC power outlet.

2. Body-pack Transmitter Battery Installation:
- Slide off the battery cover of the body-pack transmitter.
- Insert a fresh 9V alkaline battery, observing the correct polarity markings.
- Replace the battery cover.

3. Handheld Transmitter Battery Installation:
- Unscrew the lower body cover of the handheld transmitter.
- Insert a fresh 9V alkaline battery, observing the correct polarity markings.
- xxxx the body back together.

4. Transmitter Setup:
- Connect the appropriate input device (lavalier microphone, guitar cable, or headworn microphone) to the body-pack transmitter's input connector.
- For the body-pack transmitter, xxxx down the locking ring on the input connector for a secure connection.
- For the handheld transmitter, the microphone element is already built-in.

5. System Operation:
- Turn down the receiver volume control and the mixer/amplifier level before starting up the wireless system.
- Plug the receiver's power supply into an AC power source and turn on the receiver's power.
- Switch on the transmitter. The receiver's RF signal indicator will light up.
- Adjust the receiver's volume control for the desired audio level.

Please refer to the Audio-Technica ATR7200-T2 VHF Wireless Handheld Microphone User Manual for more detailed instructions and troubleshooting information.