User Manual Q&AAnswer
Dec 29, 2024 - 01:39 AM
To connect the American Bass ABX-3.1A 3-way crossover to your audio system, follow these steps:
1. Start by disconnecting the negative battery ground lead to prevent short circuits.
2. Review the primary wiring descriptions in the operational guide to determine the appropriate wiring configuration for your system. The guide provides four different wiring options: 2-Channel Two-Way System (tweeter+ full range), 2-Channel Two-Way System (tweeter+ woofer), 4-Channel TRI-AMP System, and 2-Channel multiple-purpose system.
3. Once you have determined the appropriate wiring configuration, make the necessary electrical and audio connections according to the guide.
4. Ensure that you do not route audio cables and power cables together to avoid engine noise in your audio system.
5. Double-check all connections to ensure they are done correctly.
6. Reinstall any car parts that were removed during the installation process.
7. Reconnect the negative battery ground lead.
Please refer to the "Electrical & Audio Connections" section in the operational guide for more detailed instructions and diagrams on how to make the connections specific to your desired wiring configuration.
Add New Comment