User Manual Q&AAnswer
Dec 29, 2024 - 01:35 AM
To connect your BenQ MW721 projector to a computer or laptop, follow these steps:
1. Make sure your computer or laptop is turned off.
2. Locate the VGA or HDMI port on your computer or laptop. The VGA port is usually blue, while the HDMI port is typically black.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer or laptop.
4. Locate the VGA or HDMI input port on the back of the projector. It is labeled as "Computer In" for VGA or "HDMI" for HDMI.
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer or laptop.
7. Press the "Source" button on the projector or the remote control to select the input source. Use the arrow keys to navigate and press the "Enter" button to confirm.
8. If you connected the projector using VGA, you may need to adjust the screen resolution on your computer or laptop to match the projector's native resolution (1280x800 pixels for the MW721).
9. Once the connection is established, you should see the computer or laptop display on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the BenQ MW721 projector.
Add New Comment