User Manual Q&AAnswer
Dec 29, 2024 - 01:08 AM
To connect the Samsung SWA-8500S wireless rear speakers to your Samsung soundbar, follow these steps:
1. Use the speaker cables provided in the box to connect the two surround sound speakers to the Wireless Receiver Module. The speaker cables are color-coded. Insert the grey plug into the grey jack on the Wireless Receiver and the blue plug into the blue jack on the Wireless Receiver.
2. Match the speaker cable connected to the grey jack to the speaker with the grey label, and match the speaker cable connected to the blue jack to the speaker with the blue label. Insert the red and black colored ends of each speaker cable into the red and black jacks of the appropriate speakers. The labels are on the backs of the speakers.
3. Plug the power cord of the Wireless Receiver Module into an electrical outlet. The LINK LED indicator (blue LED) on the Wireless Receiver Module should start blinking. If it doesn't, refer to step 7 on page 9 of the manual.
4. Turn off the Soundbar using the Soundbar's remote control or by pressing the (Power) button on the main Soundbar unit.
5. Press and hold the VOL button on the Soundbar's remote control for 5-6 seconds until the "ID SET" message appears on the Soundbar's display.
6. Turn on the Soundbar using the Soundbar's remote control or by pressing the (Power) button on the main Soundbar unit.
7. Check if the LINK LED on the Wireless Receiver Module is solid blue, indicating that the connection between the Soundbar and the Wireless Receiver Module is complete.
If you encounter any issues during the setup process, refer to the manual for troubleshooting steps or contact Samsung customer support for further assistance.
Add New Comment