User Manual Q&AAnswer
Dec 29, 2024 - 01:06 AM
To connect the XUnion 1000ZQ WiFi Projector to your WiFi network, follow these steps:
1. Power on the projector and navigate to the settings menu using the remote control.
2. Select the "Network" or "WiFi" option from the menu.
3. Choose the WiFi network you want to connect to from the available list.
4. If the network is password-protected, enter the password using the on-screen keyboard.
5. Once the correct password is entered, select "Connect" or "OK" to establish the connection.
6. Wait for the projector to connect to the WiFi network. This may take a few moments.
7. Once connected, you should see a confirmation message on the screen indicating a successful connection.
Please note that the specific steps may vary slightly depending on the firmware version of your projector. For more detailed instructions, refer to the user manual provided with the XUnion 1000ZQ WiFi Projector.
Add New Comment