User Manual Q&AAnswer
Dec 29, 2024 - 12:44 AM
To load staples or nails into the NEU MASTER NTC0060-EU Electric Tacker, please follow these steps:
1. Turn the tool upside down.
2. Press both sides of the locker (A) and pull the slider (B) backwards.
3. Insert the staple/nail strip into the magazine (C) with the legs facing upward. The maximum capacity is 84 staples/nails.
4. Push the slider (B) against the tacker head until it snap-locks.
5. When inserting a nail strip, tilt the tool so that the nail strip rests against the magazine side corresponding to the nail symbol on the tacker head.
Please refer to the instruction manual for visual references and additional safety precautions.
Add New Comment