User Manual Q&AAnswer
Dec 29, 2024 - 12:39 AM
To charge the battery of the YaGee GB002 Electric Splatter Ball Blaster, follow these steps:
1. Connect the included USB charging cable to the charging port on the blaster.
2. Plug the other end of the USB charging cable into a power source, such as a computer USB port or a USB wall adapter (not included).
3. The blaster's LED indicator will light up to indicate that it is charging.
4. Allow the battery to charge for approximately 2-3 hours, or until the LED indicator turns off, indicating that the battery is fully charged.
5. Once the battery is fully charged, disconnect the USB charging cable from the blaster.
Note: It is important to use the included USB charging cable and a compatible power source to ensure proper charging. Do not use a charger with a higher voltage than specified, as it may damage the battery or the blaster.
For more information and detailed instructions, please refer to the "Setup Guide" section of the YaGee GB002 Electric Splatter Ball Blaster User Manual.
Add New Comment